Emerging network architectures require precise timing to synchronize distributed equipment, such as with the IEEE 1588v2 Precision Timing Protocol. This applies to mobile networks with distributed 5G radios interoperating with LTE macro cells.
The move to 5G, Remote PHY and other distributed technologies means even more stringent synchronization targets must be met to prevent service degradation. The T-BERD/MTS 5882 solution is optimized for fiber characterization, multi-protocol service activation, troubleshooting and maintenance across mobile, cable and power utility networks.
Key Benefits:
- Simplifies multitechnology testing with an all-in-one dual-10 G handheld
- Optimized for field use with a multitouch screen, scripted workflows, and clear results
- Supports efficient best practices with repeatable methods and procedures
- Speeds fiber characterization, Ethernet service activation, and troubleshooting tests
KEY FEATURES:
- Support for emerging and legacy network protocols such as Ethernet, CPRI, eCPRI, OTN, and PDH
- Enhanced diagnostics for microwave backhaul installation and maintenance
- Job Manager application that consolidates and automates testing and reporting, resulting in a job completion in around 30 minutes.
- Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fiber Channel, and OTN support
- Automated, enhanced RFC 2544 and SAM Complete testing per ITU-T Y.1564
- Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™TCP throughput testing
- Integrated Timing/Synchronization testing including PTP/1588v2, SyncE, Wander, and One Way Delay test
- Fronthaul Testing CPRI/OBSAI Layer 1/Layer 2 and emulation of Baseband and Remote Radio units
- Dual-port version
- Compatible with VIAVI 4100-Series OTDR modules and Smart Link Mapper™, fiber microscopes, and optical power meters – Learn more about OTDR Testing
APPLICATIONS:
- Mobile and backhaul characterization, validation, and troubleshooting
- Converged Ethernet/IP network testing and troubleshooting at 10 Mbps to 10 G interfaces
- Fiber link characterization and troubleshooting
- Installation and maintenance of OTN and legacy SONET/SDH and TDM/PDH networks
- Installation and maintenance of wireless synchronization technologies such as PTP/1588v2 and SyncE
- Remote radio head (RRH) testing at the wireless base station
- Test RRH health from the bottom of the tower via CPRI links and BBU emulation
- Identify PIM and interference issues from an optical test access point (RFoCPRI)
Included:
- Viavi MTS-5800 (TB-MTS 5882) Mainframe with Following Options
- C5DUAL 10G (Dual Port 10G)
- C5BT (Bluetooth)
- C5WIFI (WiFi)
- C5REMCTRL (Command Line Remote Control)
- C5OWD (One Way Delay)
- C5TIMING (Timing and Clock Analysis
- C5GNSS (GNSS Timing and Location)
- C510GCAPTURE (10GigE Packet Capture)
- C510G1588 (10GE IEEE 1588)
- C510GELAN (10GigE WAN Ethernet)
- Viavi C5TEM-R Rubidium Oscillator Timing Expansion Module TEM TBERD 5800
- Taoglas MagmaX GPS/GLONASS/BeiDou 2 Stage Active Antenna
- SMA to SMA RG58 Cable Assembly x 2
- Calibration Documents
- Quick Start Guide/Manual
- Viavi Soft Carry Case
- Viavi Strap
- AC Adapter/Charger
- Power Cord
Condition:
New, Only Powered on to Test Working, please refer to photos.
OPTIONS / REMARKS |
Items ship as shown in the gallery photos.
No additional parts, accessories or options are included if not pictured. Launch Cable shown if for test purpose only and not included in the sale
Warranty: 30 days of R.O.R.
|
RETURN |
Please contact us first before returning.
Return can be accepted within 30 days after item arrived, and it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item, and the original postage cost is not refundable. |
SHIPPING |
· Worldwide and Australia wide Express shipping options available.
· Buyer pays for all shipping cost and is responsible for any import duty and custom clearance charges. · We will let you know the shipping cost after we receive your shipping address/or it’s calculated at checkout |