Comparison of Fujikura, Sumitomo, Fitel and INNO Fusion Splicer

Fujikura 70S

A fibre optic fusion splicer is a device that uses an electric arc to melt two optical fibres together at their end faces, to form a single long fibre.However there are a number of fusion splicers available. This article provides you detailed information about features of some most important fusion splicers including FITEL Fusion Splicer and after reading its benefits. You can buy FITEL Fusion Splicer without any confusion.

Fujikura Fusion Splicer:

Fujikura 70R+ is a powerful and rugged fusion splicer for ribbon optical fibre. Fujikura 70R+ features a mechanical wind protector and a tube heater which has been developed for faster ribbon splicing cycles. The unit also covers a high-resolution LCD monitor, powerful Li-ion battery for longer operation-time and stacked videos for on-the-go training.

Features:

  • Wireless connection by means of Bluetooth.
  • Automatic and fully configurable wind protector.
  • 11 sec. splice time & 18 sec. heating time.
  • High amplitude Li-ion battery pack (110 splices).
  • On-deck training and support videos.
  • Multi-functional carrying case with desegregated work station.
  • Dirt, rain, wind and shock resistance.

Fujikura 62S+ Splicer supplies active core alignment splice loss performance while exploiting a standard wind protector and tube heater design. An alternative to the fully mechanical core-alignment models Fujikura 70S+. Fujikura 62S+ covers an auto-start domain for both splicing and tube heating that lessens the steps necessary to process splices. With a shrink time of 23 seconds with ordinary splice sleeves, the device certifies a high level of productivity.

The 62S+ is also furnished with Bluetooth technology. 

Sumitomo Fusion Splicer:

The model-39 FastCat› Core Alignment Fusion splicer is the industry’s 1st splicer to element a Binary-Automatic Heater System. Featuring automatic heater and automatic splice functions making the FastCat the quickest splicer accessible nowadays.

The FastCat is a fully automatic, highly compact, free-standing instrument for erecting quick and painless low-loss optical fibre splices in any environment. With a typical splice loss of only 0.02dB for similar single-mode fibre.

It is created to work with nearly all fibre types containing singlemode, multimode and dispersion shifted fibre.

Features:

  • Market’s 1st Single and Mass Dual-Heater
  • Minimises the gridlock of “Heater Wait Time” by 88%
  • Dual Independent Splice Protection Heaters, Copyright Pending
  • 5.6″ Colour Scanner for Front to Back or Back to Front working
  • Automatic Fibre Depicting Detection
  • Splice Time – 9 Seconds (commonly)
  • Stacked LED for V-Groove Illumination
  • 24-Hour Technical Support via 888-SPLICER (USA Only)
  • Suitable for use with Splice-On Connectors

FITEL Fusion Splicer:

You should buy FITEL Fusion Splicer because FITEL S179 is Hand-Held, Core Alignment Splicer offers powerful achievement, supplying fast and reliable fibre splicing even under drastic-environmental conditions. By joining speed, correctness, durability, movability and state-of-the-art communication methods in one unit. This fusion splicing machine opens the door to a completely new range of applications. The FITEL S179 Fusion Splicer is completely appropriate for use with all Metro, LAN and FTTx, containing ultra bend-insensitive fibres.

Created with users in mind, the FITEL S179 Fusion Splicer provides fast splicing and heating with contemporary results, splice after splice. A high-capacity battery system assists save time by permitting 200 splicing cycles (splicing/heating) in single charge. A wide LCD screen with touch panel delivers feasible and intuitive operation. A proportionately wide splicing chamber makes optical fibre effortless to load than previous and comparable splicers. For enhanced ocularity in low-light conditions, 3+1 LED lights brighten the complete splicing chamber. A removable, left-side V-groove makes cleaning and maintenance a whiff.

Features and Benefits

Following are the features and benefits that you get if you purchase FITEL Fusion Splicer:

  • Outstanding performance for fast and appropriate fibre splicing
  • Improved ease of use and movability
  • High-speed splicing and heating
  • Robusted body design
  • Feasible, intuitive splicer working
  • Frictionless with Splice-On-Connectors (SOC)
  • State-of-the-art transmission methods
  • Shock Defiant: Equivalent to IK07 rating Mechanical impact
  • Drop Defiant: 76 cm drop tests from 5 different angles
  • Water Defiant: Equivalent to IPX2 rating drip proof
  • Dirt Defiant: Equivalent to IP5X rating dust proof

IK07 rating Mechanical brunt means that the machine protects against 2 jour brunts. It is equivalent to 500g of force from 40cm. This does not certify that the machine will always be flawless under these conditions.

Standard operations could be accomplished after conducting the above tests. These tests were executed at the Furukawa Electric Co., Ltd. laboratories with no sufficient damage resulting. This does not certify that the machine will always be unharmed under these circumstances.

The heating time may differ depending on the kind of sleeve. Moreover, the 1st heating cycle after turning the power on can be larger than the calibre heating time.

The number of splicing and heating cycles the machine can execute with a completely charged battery at 20 ̊C in semi-auto splicing mode and continuous heating mode. Before buying FITEL Fusion Splicer keep in mind that the number of cycles may differ depending on the battery status and operating states.

INNO Fusion Splicer:

The new premium core-alignment fusion splicer View 8+ is the most rugged and contemporary product to satisfy professionals. Who call for the highest performances from a fusion splicer. View 8+ features an exceptional splice time of 6 seconds and heat time of 9 seconds with large battery capacity permitting 355 cycles. Along with a 5 inch wide HD LCD monitor and foolproof intuitive GUI (Graphic User Interface). This premium splicer comes with a devoted Wi-Fi App which enables technicians to inspect progress from any smartphone.

     Features:

  • Core Alignment Splicing Procedure with DACAS (Digital Analysis Core Alignment System)
  • The World’s elevated Amplification and Resolution
  • Mobile APP Connectivity with WIFI
  • Five Colour LCD Touch Screen
  • Easy to understand Smart GUI
  • Double Touch to Zoom in and out
  • Rapid Heating Time
  • Extra-high Capacity Battery
  • Removable SOC Holder and Heating Oven
  • Ceramic Nipper for Enhanced Durability
  • Automatic Arc Compensation
  • Protective Cover
  • Harsh Weather Conditions Adaptability
  • 3-Year Extended Warranty

Leave a Reply

Your email address will not be published.